180 Hubs

Lighter, stiffer, more precise and easier to maintain – the strengths of the 180 hub are further enhanced with the new RATCHET EXP technology. The ultra-reliable freehub system transfers the highest pedaling loads resulting in direct power transmission. Smooth-running SINC Ceramic bearings bring the decisive advantage with their extremely low rolling resistance. DT Swiss 180 hubs – the ultimate in lightweight, stiffness, and durability.


The no tool concept allows the tool free disassembly. Featuring an incorporated notch, the newly developed shape of the endcaps simplifies disassembly significantly and therefore makes the maintenance even easier.


The no tool concept allows the conversion to all different drive train standard within seconds. All DT Swiss Ratchet System hubs can be converted.


The previous Ratchet system required two springs to function correctly as the inboard ratchet was not fixed to the hubshell . The fusion of the ratchet and the threaded ring in the Ratchet EXP hub not only increase durability, it also reduces the overall number of components, utilizing a single spring, resulting in a decrease in weight of the freehub system.


The previous systems required two conical springs which ensured the correct angle between the two ratchets. The fixed connection between the inner ratchet and the hub shell of the RATCHET EXP ensures that the inner ratchet is always aligned at the correct angle. Allowing the use of a single cylindrical spring resulting in a faster full engagement and therefore an increase in reliability. 


What makes the Ratchet System hubs superior, is the fact that all teeth on each of the ratchets engage simultaneously every time. In the case of pawl hubs, the engagement surface area is rather small. With the Ratchet System, the whole front face engages, creating much smaller point loads. The result is the legendary reliability of the Ratchet System hubs.


The hub stiffness is significantly defined by the distance of the bearings. For optimal performance it is important to maximise this distance, which is limited by the size of the freehub system. In the previous system the drive side bearing has to be placed next to the threaded ring and therefore the distance couldnít be increased. The integration of the drive side bearing into the threaded ring increases the bearing distance, resulting in a 15% improvement in hub stiffness.

See the full range of hubs in our Components Catalogue below:

Pricing for all DT Swiss items depends on your location. Contact your nearest DT Swiss Australian dealer for the most up to date pricing.



Road Rimbrake Straightpull (20h Front, 24h Rear)
Road Discbrake Centrelock Straightpull (24h Front and rear)
MTB Boost Centrelock Straightpull (28 Hole front and rear)

*All hubs available in all freehub standards. Shimano HG, HG11speed road, MicroSpline, Sram XD, XDR, Campagnolo.