Specifications
FRAME
Triple butted 6061 alloy fat bike frame. Tapered 1-1/8 to 1.5 head tube. 12x142mm dropout, direct mount front derailleur
FORK
Apollo 26" Fatty fork, full alloy with tapered 1-1/8-1.5 steerer
HEADSET
A-head semi integrated, for tapered 1-1/8 - 1-1/2" head tube, cartridge bearings with 8mm cone spacer
HANDLEBAR
Apollo butted alloy flat bar bore: 31.8mm W: 700mm, sweep: 9°
GRIP
Lock-on grips, Kraton rubber
HEADSTEM
Apollo 31.8mm 4 bolt stem, Ext: S/M=75mm, L=90mm,
CRANKSET
Alloy 2-pc MTB crank 30T S=170mm, M/L=175mm
BOTTOM BRACKET
FSA 100mm sealed cartridge bottom bracket
PEDALS
Low profile high impact resin
FRONT DERAILLEUR
N/A
REAR DERAILLEUR
SRAM NX 11 speed
SHIFT LEVERS
SRAM NX 11 speed
CASSETTE
SRAM 11 speed cassette 11 - 42T
CHAIN
KMC-X11
BRAKES
SRAM Level hydraulic disc brakes, 180mm rotors
WHEELS
26" alloy disc specific rims with square holes for reduced weight, 32 hole F/V, anodised disc hubs and stainless spokes
TYRES
26 x 4.5" Kenda Juggernaut 60 TPI
SADDLE
Apollo MTB sport saddle
SEATPOST / CLAMP
Apollo 27.2mm alloy, micro adjust with twin bolt head, L:400mm
Specifications are subject to change at any time and without notice.
Geometry
M | L | |
---|---|---|
Frame Size | 17" | 19" |
A – Stack | 593 | 616 |
B – Reach | 419 | 437 |
C – Stand Over Height | 427 | 463 |
D – Effective Top Tube Length | 600 | 625 |
E – Seat Tube (Centre to Top) | 430 | 483 |
F – Seat Angle | 73.0° | 73.0° |
G – Head Tube Length | 110 | 130 |
H – Head Angle | 69.0° | 70.0° |
I – Wheel Base | 1140 | 1153 |
J – Chain Stay Length | 455 | 455 |
K – BB Drop | 60 | 60 |
L – Fork Rake | 51 | 51 |
M – Axle to Crown | 483 | 483 |
Rear Dropout Spacing | 197 | 197 |
Approx. Rider Height | 170 – 178cm 5’7" - 5’10" |
178 – 185cm 5’10" - 6’1" |
text | Approx. rider height is a recommendation, and should be used as a guide only. To ensure a proper fit, we recommend visiting your local Apollo Dealer. Sizing availability may vary between countries. |