Specifications
FRAME
Alloy 6061 frame with rack and fender mounts
FORK
700c Hi-ten 1-1/8 straight blade fork with rack and fender mounts
HEADSET
A-head threadless 1-1/8"
HANDLEBAR
Alloy low riser, bore: 25.4mm, W: 580mm, sweep: 6°
GRIP
Leather look tape grip
HEADSTEM
Alloy 2 bolt stem, 25.4mm, S/M=90mm, L/XL=105mm
CRANKSET
Cold forged High polish 38T alloy crank with guard L: 170mm
BOTTOM BRACKET
Cartridge bottom bracket
PEDALS
High impact dual compound resin
FRONT DERAILLEUR
N/A
REAR DERAILLEUR
3 speed internal hub gears
SHIFT LEVERS
Shimano Nexus shift 3 speed
CASSETTE
Shimano 18T freewheel
CHAIN
KMC Z-610
BRAKES
Alloy linear pull brakes
WHEELS
700c double wall alloy rims. 32 hole A/V, alloy hubs with double seal system. Stainless spokes
TYRES
700 x 40c wire bead
SADDLE
Classic series saddle with brass rivets
SEATPOST/CLAMP
Alloy 27.2mm micro adjust
EXTRAS
Alloy full length front and rear mudguards, alloy rear rack
Specifications are subject to change at any time and without notice.
Geometry
M | L | XL | |
---|---|---|---|
Frame Size | 19.5" | 21" | 22" |
A – Stack | 556 | 576 | 595 |
B – Reach | 420 | 429 | 437 |
C – Stand Over Height | 440 | 465 | 489 |
D – Effective Top Tube Length | 585 | 605 | 625 |
E – Seat Tube (Centre to Top) | 500 | 530 | 560 |
F – Seat Angle | 73.5° | 73.0° | 72.5° |
G – Head Tube Length | 155 | 175 | 195 |
H – Head Angle | 71.5° | 72.0° | 72.0° |
I – Wheel Base | 1068 | 1078 | 1104 |
J – Chain Stay Length | 460 | 460 | 460 |
K – BB Drop | 65 | 65 | 65 |
L – Fork Rake | 45 | 45 | 45 |
M – Axle to Crown | 380 | 380 | 380 |
Rear Dropout Spacing | 120 | 120 | 120 |
Approx. Rider Height | 165 – 175cm 5’5" - 5’9" |
173 – 180cm 5’8" - 5’11quot; |
178 – 188cm 5’10" - 6’2quot; |
text | Approx. rider height is a recommendation, and should be used as a guide only. To ensure a proper fit, we recommend visiting your local Apollo Dealer. Sizing availability may vary between countries. |